EXIT FORUMS
ClickaNerd.com - Cloning Sim Card - Iphone - Android
ClickaNerd.com
ClickaNerd.com
HOME | PROFILE | REGISTER | WEB PAGES | MEMBERS | SEARCH | HELP
Username:
Password:
Save Password
 All Forums
 Forums
 WEB PAGES
 Cloning Sim Card - Iphone - Android
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Tami

2 Posts

Posted - 01/23/2018 :  13:53:21  Show Profile  Reply with Quote
Subscriber Identity Module - SIM Card




First I want to apologize for using a non US made software program to
perform the algorithm crack of the source SIM.

All the instructions are in English.

This engineer took the time to reverse engineer an expensive UK MI6 tool.

Rest assured the .exe does not contain any spyware, as we tested it in VMware,
with a series of network security tools, and it does not open any TCP or
UDP ports.

With that said, let's give the Chinese software engineer credit where credit is due.

This goes without saying - but - it is a Federal crime to clone a SIM card for the
purposes of theft of service or to circumvent network security.






SIM cards are manufactured based on three algorithms:
- COMP128v1 - COMP128v2 - COMP128v3

It is important to note that only COMP128v1
version SIM cards can be cloned according to
the NSA and MI6 intelligence agents.

DOWNLOAD THESE (2) SOFTWARE TOOLS:
1) http://www.clickanerd.com/forums/uploadfolder/china-say-fu.exe (Magic SIM)
2) http://www.clickanerd.com/forums/uploadfolder/sim-card-reader.exe

This process works with "unlocked SIM cards" only.

Step 1: Install source SIM card in the card reader, click read from the card
utilizing MAGIC SIM.

When it displays ‘connected’, select crack SIM in the toolbar.

Step 2: Click strong KI and select all of the other find options and then click start.

Once your KI is found and the crack is finished, click the file,
"save as" and save your cracked SIM .dat info
to your hard drive.

(EXTREMELY IMPORTANT)

Step 3: You must click disconnect from the file menu, or you will ruin your source SIM card.

Step 4: Once it says disconnected. Remove the source SIM card.

Step 5: Insert a blank SIM card and open the USB SIM Card Reader Software.

Step 6: Click connect. It should say ‘No Info Found’ if SIM is blank.

Step 7: Select write to SIM, it will prompt you to select a .dat file. (the one you just created)

Step 8: Click start, it will take about 10 minutes to write it to the blank SIM.






CDMA and GSM networks are two types of cellular phone networks, and generally,
if you have a phone made for one, it can't be used on the other. In the US, Sprint®
and Verizon® run on the CDMA networks while AT&T and T-Mobile
run on the GSM networks.



Edited by - Tami on 01/23/2018 14:00:16

shawn

88 Posts

Posted - 02/22/2018 :  21:59:15  Show Profile  Reply with Quote
REVIEW





Annette and I went into their store last week and we both had the BBQ ribs right off the heat shelf.

The best ...

They had T-bones (1) inch thick on display for under $10.00.

When it warms up, I will be back for sure.

http://www.CospersCountryMeatMarket.com << WEBSITE








Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
ClickaNerd.com © 2017 - ClickaNerd.com Go To Top Of Page